Making your artwork to Print Ready

Rate this post

Pint Ready Artwork Requirements
File Specifications

Print Ready Artwork Specifications:

Print Ready Artwork Specifications are below.
Bleed: 3mm on all sides
Recommended Safe Zone: 3mm in from all sides
Accepted File Types: PDF version 1.4 or higher
Recommended Resolution: 300 dpi for all images
800 dpi for all text as an image

Essentials:

Colours must be either CMYK or Grey Scale (i.e. no RGB, Pantone or Spot Colours)
All fonts must be embedded or converted to curves
Borders and type must be within safe zone as variations may occur when trimming
Ensure your artwork matches your order specifications

General Instructions:

Artwork must be correctly sized with required amounts of bleed
All transparency effects are to be flattened
Overprints must be set correctly for desired result
All colour profiles are to be removed
Ensure all images are at correct resolution
Registration marks, keylines, dielines and other non-printing items must be removed
Crop marks, if required, are to be positioned outside bleed area.

Email us at info@allprints.com.au

Read our satisfied customers’ review

 

Leave a reply